What Are the Tiny Hard Spots on BOPP Film? Gels and Fisheyes

Key takeaway

Meta: Those pinhead-sized specks you see when you hold BOPP film up to the light have a name, and several possible causes. A plain-language guide to gels, fisheyes and unmelted resin – what they are,

Meta: Those pinhead-sized specks you see when you hold BOPP film up to the light have a name, and several possible causes. A plain-language guide to gels, fisheyes and unmelted resin – what they are, where they come from, and when they actually matter.

01

First, the names

Close-up comparison: a gel is a hard inclusion, while a fisheye has a visible ring around the defect. In the trade these specks are usually called gels, fisheyes or hard spots, and the words do get…

02

First, the names (continued)

A fisheye is what a gel often looks like: a hard centre with a ring of disturbed film around it. Unmelted resin and burnt particles are close relatives.

03

What a gel actually is

Polypropylene is made of very long molecular chains. A few chains in any batch are far longer than the rest, or have cross-linked into a network.

04

Where gels come from

Typical gel sources in BOPP film: resin variation, dead spots in the extruder, transition material and contamination. The resin itself: a small high-molecular-weight fraction is normal in polypropy…

05

Fisheyes: the ones with a ring

A fisheye is not a separate defect so much as a gel seen in a particular way. There is a hard core in the middle, and around it a ring where the film was stretched thinner as it flowed past the obs…

06

Other things that look like spots

Not every speck is in the film. Dust and fibre sit on the surface and can often be wiped away.

07

How converters usually live with them

In practice, converters rarely reject a roll for one speck. They look at how many there are per square metre, how big the largest one is, and whether the specks cluster in the area that matters.

08

FAQ

Are gels a sign of bad film? Not by themselves.

Key takeaway

Are gels a sign of bad film? Not by themselves. Some level of gel is normal in oriented polypropylene film. They become a problem when the size or count is higher than the job can tolerate – in fine printing, metallizing or high-clarity packaging. Can a gel be removed or filtered out? Melt filtration catches a lot of them before the die, which is why filter mesh and filter-change discipline matter

Request free film samples or send your specification — we reply with a quotation within 24 hours.

Frequently Asked Questions

What buyers should know about first, the names

Close-up comparison: a gel is a hard inclusion, while a fisheye has a visible ring around the defect. In the trade these specks are usually called gels, fisheyes or hard spots, and the words do get used loosely.

What a gel actually is?

Polypropylene is made of very long molecular chains. A few chains in any batch are far longer than the rest, or have cross-linked into a network.

Where gels come from?

Typical gel sources in BOPP film: resin variation, dead spots in the extruder, transition material and contamination. The resin itself: a small high-molecular-weight fraction is normal in polypropylene, and oxidation during storage or tr…

Do you provide free samples?

Yes. We provide free samples of our core BOPP film grades for testing; you only cover the courier cost.

What is your MOQ and lead time?

Typically 1,000–3,000 m² per specification (about 500 kg). Standard grades usually ship within 7–15 days; samples within 1–2 working days.

滚动至顶部
WhatsApp