Meta: Reverse printing buries ink under the film. Here is how graphics end up inside the laminate, and what that means for durability and shine.
Meta: Reverse printing buries ink under the film. Here is how graphics end up inside the laminate, and what that means for durability and shine.
Two ways to put ink on film
Figure 1. Reverse printing: the artwork is printed onto the inner face of the BOPP web before lamination.
Two ways to put ink on film (continued)
It is straightforward and widely used for labels, tapes and some bags. Reverse printing puts ink on the inside face of the film; after lamination, that face is bonded against another layer, and the…
Why the ink is buried
Figure 2. The printed ink is enclosed within the laminate, protected by the outer BOPP film and bonded to the inner structure.
Why the ink is buried (continued)
It also cannot fade under handling, because the layer above it acts as a permanent window. For retail packs that get stacked, shipped and handled every day, this single reason explains most of the…
What the film adds to the image
Figure 3. Glossy, matte, soft-touch, pearl and metallized film finishes change the appearance of the printed design.
Why BOPP is the usual choice here
Reverse printing needs a film that runs through gravure presses at speed, holds fine dots, laminates without trapping bubbles, and stays dimensionally steady while ink dries. BOPP does all four at…
Frequently Asked Questions
Can you feel the ink on a reverse-printed bag? No.
Key takeaway
Can you feel the ink on a reverse-printed bag? No. The ink sits under the outer film, which is why the surface feels smooth and clean no matter how detailed the artwork is. Does buried ink mean better colors? Often yes. The ink never wears, and the film above adds gloss or a controlled matte effect, so the design stays close to its proof for longer. What exactly does reverse printing mean? Printin
Request free film samples or send your specification — we reply with a quotation within 24 hours.
Frequently Asked Questions
What buyers should know about two ways to put ink on film
Figure 1. Reverse printing: the artwork is printed onto the inner face of the BOPP web before lamination.
Why the ink is buried?
Figure 2. The printed ink is enclosed within the laminate, protected by the outer BOPP film and bonded to the inner structure.
What the film adds to the image?
Figure 3. Glossy, matte, soft-touch, pearl and metallized film finishes change the appearance of the printed design.
Do you provide free samples?
Yes. We provide free samples of our core BOPP film grades for testing; you only cover the courier cost.
What is your MOQ and lead time?
Typically 1,000–3,000 m² per specification (about 500 kg). Standard grades usually ship within 7–15 days; samples within 1–2 working days.
