BOPP film can create two opposite production complaints. Some rolls feel difficult to separate or unwind, while others move too freely and become hard to control. These conditions are often described
BOPP film can create two opposite production complaints. Some rolls feel difficult to separate or unwind, while others move too freely and become hard to control. These conditions are often described as blocking and excessive slip. Both involve the film surface, but they require different observations and should not be reduced to one general statement that the roll is sticky or slippery.
Blocking and Unwanted Film Adhesion
Blocking is unwanted adhesion between adjacent film layers. It becomes noticeable when the layers require unusual force to separate, the web opens unevenly or the surface shows marks after separation.
Slip and Coefficient of Friction
Slip describes how easily one surface moves over another. Coefficient of friction, usually shortened to COF, provides a controlled way to measure this surface behavior.
Static and Kinetic Coefficient of Friction
Static COF relates to the force required to start movement between surfaces. Kinetic COF relates to the force while movement continues.
Why COF Results Can Change
COF is a surface measurement. Dust, oil, printing, coating, repeated handling and contact with packaging can alter the surface presented to the test.
Test Method and Sample Orientation
The test request should state whether the film runs against itself or another surface and which side faces the contact plane. If the two sides have different treatment or finish, reversing the samp…
Production Symptoms Point to Different Causes
A web that jerks at unwind may involve blocking, roll hardness, brake control or an uneven roll profile. A web that slides sideways may involve low surface resistance, poor alignment, insufficient…
Winding Pressure and Temperature
Roll layers remain under pressure after winding. Excessive pressure, an uneven profile or exposure to unsuitable heat can increase intimate contact between layers and make separation more difficult.
Separate Material and Machine Factors
Compare the affected roll with an approved roll on the same line under the same conditions when practical. Then compare retained samples using the agreed COF or blocking method.
Retained Samples and Traceability
Keep samples from an affected area and a normal area, marking the roll side, machine direction and position. Link them to the roll number, batch and production time.
Key takeaway
A trial should use the intended equipment and normal production sequence. Record unwind behavior, tension stability, guiding, feeding, stacking and finished appearance as relevant to the job. Keep the machine settings and retained samples with the approval record. The purchase specification should name the grade and the agreed test condition. If the supplier, converter or end use changes, review t
Request free film samples or send your specification — we reply with a quotation within 24 hours.
Frequently Asked Questions
What buyers should know about blocking and Unwanted Film Adhesion
Blocking is unwanted adhesion between adjacent film layers. It becomes noticeable when the layers require unusual force to separate, the web opens unevenly or the surface shows marks after separation.
What buyers should know about slip and Coefficient of Friction
Slip describes how easily one surface moves over another. Coefficient of friction, usually shortened to COF, provides a controlled way to measure this surface behavior.
What buyers should know about static and Kinetic Coefficient of Friction
Static COF relates to the force required to start movement between surfaces. Kinetic COF relates to the force while movement continues.
Do you provide free samples?
Yes. We provide free samples of our core BOPP film grades for testing; you only cover the courier cost.
What is your MOQ and lead time?
Typically 1,000–3,000 m² per specification (about 500 kg). Standard grades usually ship within 7–15 days; samples within 1–2 working days.
